Assembling style: MCJU, MCFB, MCMJP, MCGS, MCDJ, MCSF-5, MSBE, MCRJ-S*, MCRQ*, MCRQ-S, MCHC-6, MCHD*, MCHH, MCHU, MCHS, MCHX, MCHG2, MCHJ, MCHY, MCRT, MEQI.
| Measuring range | 50 mm (※1) |
|---|---|
| Switching logic | Solid state output, normally open / normally close switchable |
| Switch type | 3 NPN current sinking, 3 PNP current sourcing |
| Operating voltage | 5 ~ 30V DC |
| Switching current | 150 mA max. (※2) |
| Power supply voltage | 30 V DC (※2) |
| Contact rating | 4.5 W max. (※2) |
| Current consumption | 20 mA @ 24 V DC max. |
| Voltage drop | 1.5 V max. (with resistive load) (※2) |
| Leakage current | 0.01 mA max. |
| Repeatability | ≤ 0.01 mm |
| Indicator | Yellow LED, Green LED, Red LED |
| Cable | ø4 PVC – 26 AWG ( 0.15mm² ) – 5 cores |
| Operating frequency | 50 Hz |
| Magnet requirement | 40 ~ 1000 Gauss (※3) |
| Temperature range | -10 ~ 70 °C |
| Shock | 50 G (※4) |
| Vibration | 9 G (※5) |
| Enclosure classification | IEC 60529 IP69 |
| Protection circuit | 2, 3, 4 (※6) |
| Weight | 54 g |
| Remark | ※1: The difference of magnetism, environment, and interference of magnetic field can cause the deviation of measurement. ※2: The standard is for each output. ※3: Measuring standard target: ø15.5 × ø8 × 5t ( Anisotropy rubber magnet ) ※4: Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time. ※5: Double amplitude 1.5 mm / 10 Hz ~ 55 Hz ~ 10 Hz ( Sweep 1 min ) / X , Y , Z 3 directions / 1 hour each time. ※6: 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |
Reviews
There are no reviews yet.